I’m with Earl – Vinyl Sticker

$5.99

Whether it’s on a car window, house window or office window, show your support and reveal to everyone you’re with Earl.

Free Shipping

  • • 4.5″ x 6″ Durable Vinyl Sticker
  • • 100% Weather Proof (well maybe not 150 MPH gale force winds, but you never know)
  • • Will stick to any smooth surface i.e. laptops, motorcycle helmets, lunch boxes
  • • Perfect companion to the “Don’t Blame Me: I Voted for Earl Pitts” bumper sticker

 

Category:

Description

Watch video to see how easy it is to apply your vinyl sticker:

How To Apply A Small Sticker or Decal

Step 1 - Clean the area thoroughly

Step 1

Clean the area thoroughly with rubbing alcohol or soap and water. Do not use Windex or similar products because it will leave a residue behind that will prevent the sticker from adhering well.

Step 2 - Prepare the sticker for application

Step 2

Prepare the sticker for application by firmly rubbing a squeegee or credit card across the clear transfer tape. This removes any air bubbles that may have formed and makes the sticker cling to the transfer tape.

Step 3 - Peel the white paper backing off

Step 3

Peel the white paper backing off the sticker. If the sticker clings to the backing, slowly replace the paper backing and repeat Step 2.

Step 4 - Lower the sticker onto the surface

Step 4

Slowly lower the sticker onto the surface and rub it in place firmly with a squeegee or credit card. For best results, wait 24 hours before moving to the next step.

Step 5 - Slowly peel the clear transfer tape off

Step 5

Slowly peel the clear transfer tape off at an angle. Be careful not to pull the sticker off the surface. If sticker pulls away from the surface repeat Step 4.

*Use a pin to poke any air bubbles in the center and push the air out through the hole.
*For best results do not apply a sticker in extreme hot or cold temperatures.

Loading Facebook Comments ...